DMT Simple-Sharp 20003 manual diamond Knife Sharpener, 600 grit

Need a practical, functional tool to maintain your knife blades? Choose this DMT Simple-Sharp manual sharpener! This tool is ideal for indoor use, for example, to sharpen your kitchen knife or EDC knife.

It features two plates for simultaneous sharpening of both sides of the blade, with a sharpening angle of 18° per side. Both plates are diamond-coated, to deliver a final average grit of 600. This allows you to maintain knives that are starting to dull, to give them a good cutting base.

As for its construction, the DMT brand has added rubber material to the base of the sharpener and on the sides for more stable and ergonomic use.

Its dimensions enable you to store it easily once you've finished using it.

How to use the sharpener

Place the sharpener on a flat surface, then insert the blade into the slot. Once inserted, pull it all the way to the tip to sharpen the entire effective part. You can repeat this maneuver until you obtain a sharper edge than before (usually 5 or 6 passes, depending on the condition of the knife). Just so you know, you don't need to put any greasy oil on the tool; dry sharpening is possible.

How do I maintain it?

You can easily disassemble the housing to maintain and clean steel debris from the sharpener with a small hard brush.

Discover all the sharpening guns available on KnifeLeader.eu!