HORL®2 Cruise Knife Sharpener set

Modern, efficient sharpening with the Horl 2 Cruisesharpener!

The Horl 2 Cruisesharpener is perfect for beginners: it has all the essential qualities for fast, effortless sharpening.

This light-gray manual sharpener features two sharpening surfaces on either side:

- Diamond surface with 46 μm (micron) grit size, set on a 55% nickel base. Thanks to this galvanic process, sharpening is superior and long-lasting.

- Stainless steel surface removes any remaining particles for a smooth, perfect edge.

These two discs are fixed and cannot be unscrewed.

The HORL® S-Pad magnetic holder with powerful neodymium magnets is also included for safe sharpening. Thanks to its non-slip texture, you can consistently sharpen all blades, even those of small knives.

A 20° sharpening angle is located on one side of the magnetic holder, ensuring excellent stability during use.

The Horl 2sharpener is easy to use. Here's how it works in 4 steps:

1 - Place the magnetic support on a flat surface. Place the knife against the magnets: for a large blade, with the cutting edge at the top and the back of the blade against the work surface. For a small blade: edge up, with the edge protruding slightly from the magnetic support, the back of the blade not touching the work surface.

2 - Hold the magnetic support with one hand and hold thesharpener horizontally with the other hand between thumb and forefinger. Roll it along the knife, applying gentle pressure from the sharpening surface along the edge of the blade.

3 - Turn thesharpener 180° and roll the sharpening surface along the edge of the blade. A few back-and-forth strokes are all it takes to smooth the blade and remove the morfile.

4 - Remove the knife from the magnets using a lever movement. Turn it over and proceed to the other side of the blade, repeating steps 1 to 3!

Practical: watch the tutorial video on this page!

Delivered in a sober, modern white box, the set is easy to store!

Find out more about the brand's accessories here !