By buying this product you can collect up to
4990
points.
Your cart will total 4990
points that can be converted into a voucher of
€2.50.
For buying this product you should have
99800
points.
Your current number of points is
0 points
.
A stone of choice to perfect the cutting edge of your knives
Pale yellow ceramic surface - Fine grain #3000
Integrated Nagura stone: increases abrasive action
Box can be used as a base, for use or soaking
Fast results - Pleasant to use (water-based)
Attached to a white anti-slip plate
Japanese stone ideal for polishing cutting surfaces
Dimensions: 18.3 x 6.3 x 2cm - Weight: 0.51kg
You might also like
Find all Suehiro sharpening stones on KnifeLeader! This Japanese manufacturer specializes in sharpening, and the stones it creates are durable and pleasant to use for everyone (seasoned chef or amateur).
This Cerax whetstone is fired at very high temperatures, making it more resistant to cracking.
Its #3000 grit is considered fine, so it is recommended for polishing the edge, as it is a finishing stone.
Please note: the stone's dimensions may vary by a few millimeters, and its weight by a few grams, which is quite normal.
How to use your stone :
This is a water stone, so it must be soaked for 5 minutes before use. You can add water during sharpening, when you feel it's necessary. You can do this directly by hand, or with a pipette.
After a few moments' use, you'll notice a small colored sludge forming on the surface of the stone, and this is perfectly normal. This "sludge" is even essential, as it helps to sharpen the knife, so don't clean it during the process.
After use, you can rinse the surface and clean it with a soft brush. Wipe with a dry cloth, then leave to dry in a room at room temperature (keep out of direct sunlight for faster drying).
Additional accessories :
A small white Nagura stone is supplied with the whetstone (approx. 7.2 x 1.7 x 0.9 cm). It is used to create the famous slurry that facilitates the action of the stone. As already mentioned, it reinforces the abrasive power of the main stone, and therefore increases its performance.
The #3000 grit stone is glued to a white base to stabilize it during use. It also comes with a box that you can use for storage, as a sharpening stand when in use, or as a small basin for soaking the stone before use! The box also has a space for the Nagura stone, to prevent it getting lost. Its black feet are removable.
A few words about the manufacturer :
Suehiro oversees every stage in the manufacture of the stones we create, from research and development to actual production.
Here are the main phases:
- Mixing and stirring ingredients in large vats
- Press each stone into a rectangular shape
- Allow shaped stones to dry for a short time
- Bake to set
- Carry out the final moulding by hand (a craftsman passes the stone over a grinding wheel to ensure a clean finish)
- Quality control before the stones are placed in the packaging
You might also like
(5)
(1)
(0)
(0)
(0)
(0)
