By buying this product you can collect up to
7490
points.
Your cart will total 7490
points that can be converted into a voucher of
€3.75.
For buying this product you should have
149800
points.
Your current number of points is
0 points
.
Opt for this Japanese finishing stone to maintain your equipment
Very fine #6000grit for polishing the edge of your knives
Extra Nagura stone: increases the stone's abrasive action
Pleasant to use (water-based) - Ideal for professionals
Useful for knives, scissors, small tools...
The stone is attached to a non-slip base
Dimensions: 20.6 x 7.3 x 2.3 cm - Weight: 900g
You might also like
The Japanese Suehiro Shiramine 6000 large Sharpening stone has been a recognized finishing stone for years. Highly appreciated by professionals, it is also suitable for novice sharpeners, thanks to its ease of use.
Its #6000 grit is considered very fine, so it is recommended for polishing the edge of your blades to reveal their full potential.
It is suitable for kitchen knives, but can also be used with scissors, small tools, folding knives...
Find out more about the manufacturer :
Suehiro is a Japanese specialist in professional sharpening stones. He is dedicated to developing practical, long-lasting stones. To achieve this, he manages every stage in the manufacture of the stones he creates, from research and development to actual production. First, the ingredients must be mixed and stirred in large vats. Each stone is then shaped into a rectangle using a press, and left to dry for a short time. They are then fired, and a craftsman passes the stones over a grinding wheel to ensure a clean finish. Finally, quality control is carried out.
Tips for using the stone :
The stone should be soaked in water for 5 to 10 minutes before use. You can reapply water to the surface of the stone during sharpening, when you feel it's necessary. You can do this directly by hand, or with a pipette for greater precision.
After a few moments' use, you'll notice a small colored sludge forming on the surface of the stone, and this is perfectly normal. This "sludge" is even essential, as it helps to sharpen the knife, so don't clean it during the process.
A small Nagura stone (approx. 6.6 x 1.5 x 1.4 cm) is supplied with the stone. This small, brick-colored model is used to create the famous slurry that facilitates the stone's action.
After use, you can rinse the surface and clean it with a soft brush. Wipe with a dry cloth, then leave to dry in a room at room temperature (keep out of the sun for faster drying).
The stone is suspended from a non-slip base with two raised feet, which provide stability when in use.
Please note: the stone's dimensions may vary by a few millimeters, and its weight by a few grams - this is perfectly normal.
See our selection of Suehiro stones for complete sharpening of all your cutting Utensils!
You might also like
