By buying this product you can collect up to
5290
points.
Your cart will total 5290
points that can be converted into a voucher of
€2.65.
For buying this product you should have
105800
points.
Your current number of points is
0 points
.
Yellow finishing stone, easy to use for everyone
Finegrit #3000 for polishing the cutting edge of various blades
Use with water: soak for ten minutes before use
Nagura stone supplied: enhances the abrasive action of the main stone
The stone is attached to a base with non-slip feet
Dimensions: 20.6 x 7.3 x 2.3 cm - Weight: 875g
You might also like
Find here one of Suehiro's finishing stones.
Originally designed for professional use, it can also be used at home, thanks to its ease of handling.
The Ouka 3000Sharpening stone features, as its name suggests, a #3000 grit. This fine grit is recommended for giving a well-polished finish to the edge of your knives.
A few words about Suehiro:
He's a Japanese specialist in professional sharpening stones, which he wants to be practical and durable. To achieve this, he manages every stage in the manufacture of his stones, from research and development to actual production. First, the ingredients are mixed and stirred in large vats. Each stone is then shaped into a rectangle using a press, and left to dry for a short time. They are then fired, and a craftsman passes the stones over a grinding wheel to ensure a clean finish. Finally, quality control is carried out.
How to use your stone :
The stone should be soaked in water for 5 to 10 minutes before use. You can reapply water to the surface of the stone during sharpening, when you feel it's necessary. You can do this directly by hand, or with a pipette for greater precision.
After a few moments' use, you'll notice a small colored sludge forming on the surface of the stone, and this is perfectly normal. This "sludge" is even essential, as it helps to sharpen the knife, so don't clean it during the process.
A small Nagura stone (approx. 6.6 x 1.5 x 1.4 cm) is supplied with the stone. This small, brick-colored model is used to create the famous slurry that facilitates the stone's action.
When you've finished, you can rinse the surface you've used and clean it with a small, soft brush. Wipe with a dry cloth, then leave to dry in a room at room temperature (do not place in direct sunlight; it should dry naturally, without added heat).
The stone is suspended from a non-slip base with two raised feet, which provide stability when in use.
Important: the stone's dimensions may vary by a few millimeters, and its weight by a few grams, but this is perfectly normal.
For even more choice, check out all the Suehiro whetstones we offer!
You might also like
